The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat, or laminated glass sheets of the multi-layer type with adhesive interlayers (NOT insulating glass).
Do not use the clamp for lifting glass sheets with rough, wavy, moulded glass or worked surfaces.
During transport, keep the lower edge of the plate at a maximum of 20 cm (7 7/8” inch) from the floor.
The glass transporting pliers are not licensed for use on construction sites. The risk is borne solely by the user of the pliers. M e G does not accept any liability for any resulting damages.
The lifting clamp has been designed for handling a single flat glass sheet at a time, according to the table to the side of thicknesses:

M&G reserves the right to change any characteristics without warning

Admissible thickness of sheets in millimetres  ( inch )

Model                 F min               F max

000900                  3                     19

Loading capacity:   max. 500kg    ( 1102 lbs )    -      min. 20 kg    ( 44 lbs )

Usage's temperature: from +5 ° to +45 ° - Storage Temperature: -15 ° to +65 °

NB: maximum dimensions of glass sheets   3210 x 2550 mm     ( 126  31/82” x  100  25/64”  inch)

Dimensional features, applicable to all series 900 models in millimetres  ( inch )

Dimension        A          B         C          D         E           G            H

Value mm.      70        100     550      110     620       220        380

Value (inch)  (2 65/86")              (21 17/26")                (24 9/22")                      (14 49/51")
                                                (3 15/16")                   (4 1/3")                    (8 43/65")

Mass of the clamp:   about 19 kg    ( 42 lbs )
NB: the hoisting device for the clamp should have a minimum loading capacity of 519 kg   (1,142 lbs)