Glass Lifting Clamp CE - Model 001000

The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat, or laminated glass sheets of the multi-layer type with adhesive interlayers (NOT insulating glass).
Do not use the clamp for lifting glass sheets with rough, wavy, moulded glass or worked surfaces.
During transport, keep the lower edge of the plate at a maximum of 20 cm (7 7/8” inch) from the floor.
The glass transporting pliers are not licensed for use on construction sites. The risk is borne solely by the user of the pliers. M e G does not accept any liability for any resulting damages.
The lifting clamp has been designed for handling a single flat glass sheet at a time, according to the table to the side of thicknesses:

M&G reserves the right to change any characteristics without warning

Models  001000  -  0F1000/30  -  0F1000/40  -  0F1000/50 -  0F1000/55

Admissible thickness of sheets in millimetres  ( inch )

Model                 F min               F max

001000            4  (3/19")        24  (17/18")
001000/30    10  (37/94")      30  (1 2/11")
001000/40    20  (37/47")      40  (1 23/40")
001000/50    30  (1 2/11")     50  (1 31/32")
001000/55    35  (1 17/45")   55  (2 1/6") 

Loading capacity:   max. 1000kg    ( 2205 lbs )    -      min. 20 kg    ( 44 lbs )

Usage's temperature: from +5 ° to +45 ° - Storage Temperature: -15 ° to +65 °

NB: maximum dimensions of glass sheets 6000 x 3210 mm     ( 236 15/68” x  126 31/82”  inch)

Dimensional features, applicable to all series 1000 models in millimetres  ( inch )

Dimension        A          B         C          D         E           G            H

Value mm.      70        100     680      120     740       230        475

Value (inch)  (2 65/86")              (26 71/92")                (29 2/15")                      (18 7/10")
                                                (3 15/16")                 (4 71/98")                    (9 1/18")

Mass of the clamp:   about 28 kg    ( 62 lbs )
NB: the hoisting device for the clamp should have a minimum loading capacity of 1,028 kg   ( 2,262 lbs )

Request more information

M & G Vigevano

Equipment and clamps for machining
of flat glass and of insulating glass


Corso Genova nr. 214
27029 Vigevano (Pavia) - Italy
P.IVA 02434380180
Fax / Phone +39.0381.34.66.54


 

Contact form

I'm not a robot

Powered by ChronoForms - ChronoEngine.com