Glass Lifting Clamp CE - Model 00R350
The lifting clamp is removable loading gripper equipment used on a lifting apparatus for lifting and transporting individual flat, or laminated glass sheets of the multi-layer type with adhesive interlayers (NOT insulating glass).
Do not use the clamp for lifting glass sheets with rough, wavy, moulded glass or worked surfaces.
During transport, keep the lower edge of the plate at a maximum of 20 cm (7 7/8” inch) from the floor.
The glass transporting pliers are not licensed for use on construction sites. The risk is borne solely by the user of the pliers. M e G does not accept any liability for any resulting damages.
The lifting clamp has been designed for handling a single flat glass sheet at a time, according to the table to the side of thicknesses:
The indicated characteristics may change without notice.
Admissible thickness of sheets in millimetres ( inch )
Model F min F max
00R350 3 (2/17") 12 (43/91")
Loading capacity: max. 500kg ( 1102 lbs ) - min. 20 kg ( 44 lbs )
Usage's temperature: from +5 ° to +45 ° - Storage Temperature: -15 ° to +65 °
NB: maximum dimensions of glass sheets 3210 x 2550 mm ( 126 31/82” x 100 25/64” inch)
Dimensional features, applicable to all series R350 models in millimetres ( inch )
Dimension A B C D E G H
Value mm. 45 45 300 85 575 165 215
Value (inch) (1 71/92") (11 73/90") (22 37/58") (8 46/99")
(1 71/92") (3 9/26") (6 1/2")
Mass of the clamp: about 17 kg ( 37 lbs )
NB: the hoisting device for the clamp should have a minimum loading capacity of 517 kg (1,138 lbs)
Request more information
Equipment and clamps for machining
of flat glass and of insulating glass
Corso Genova nr. 214
27029 Vigevano (Pavia) - Italy
P.IVA 02434380180
Fax / Phone +39.0381.34.66.54
Contact form
M&G Snc
Equipment and clamps for the
flat glass processing
and the glassmaker
corso Genova N 214
27029 Vigevano (PV) Italy
P. IVA 02434380180
Phone / FAX +39.0381.34.66.54
27029 Vigevano (PV) Italy
P. IVA 02434380180
Phone / FAX +39.0381.34.66.54